Textile Motors With Three - Phase Asynchronous 360V 3kW IP54 300HZ

Description:

Voltage: 360V

Frequency: 300HZ

Power: 3kW

Rotation speed: 9000r/min

Y2EJ series electromagnetism-brake three-phase asynchronous motor ,frame number 63 to 225,.the power range from 0.12 to 45kw.

Y₂EJ series (IP54) electromagnetism-brake three-phase asynchronous motor is derived from Y₂ series(IP54) three-phase asynchronous motor.frame number 63 to 225,toally 11 frame numbers.the power range from 0.12 to 45kw,Electrodes number have 2.4.6.8 total 68 specifications.this series motor's power grade,installation dimesion,insulating grade,work mode cooling mode and applic able condition,etc.are all same as Y₂ series.The performing standards is JB/T8680-1998The technical conditions of Y₂ series(IP54 three-phase asynchronous motor).This series produce according to JB/T6456-1992the technical conditions of YEJ series(IP44)electromagnerism-brake three-phase asynchronous motor.

Applications:

Electromagnetism brake rating voltage:only frame size 71-100 are DC99V,112-200 are DC170V.
Y₂EJ series motor mainly apply to stop quickly,locate to a nicety,reciprocating,frequenty start,anti-sliding,such as lift machinery,transport machingery,color packing machinery, pringting machinery,foodstuff machinery,construction machinery,carpenter machinery,reduing machinery,metallurgy machinery,forging machinery etc.
Y₂FJ series (IP54)electromagnerism brake three-phase asynchronous motor's feature and operation

Specifications:

principle
The stator and rotor of Y₂EJ series (IP54) electromagnetism brake three-phase asynchronous motor are general ues of Y₂ series the attached electromagnetism iron can be excited by direct current,while connect the three phase power source ,the electromagnetism iron can get energy and occur the magnetic attraction to attract the armature so as to separate the firction surface of disk brake from the static frictionsub-phase and then rotate under the action of magnetictorque,while cut off the electricity,the magnetic iron will also out of power and the attraction of magnet will also loss.then,under the pressure of brake spring ,the armature will contact the disk brake and occurthe friction forque and in the final stop the motor,To change the stator postition after the stop of motor,we can realize the motor stop by releasing device,the proced use is to rotate release screw.two special sliding blocks and make the mutual displacement so as to separate the disk brake from the static frictoion sub-phase.

Competitive Advantage:

It can be used on different types of textile machinery including draw frame, simplex and ring spinning frame.  It has already been tested in many mills in China and overseas market like Vietnam, Pakistan, Bangladesh, etc.  After long period market application and technical improvement, the quality of Q.C. rubber cot is acceptable by our customers.

Tell us your need, we will give a satisfied solution